Surface Preparation
Surfaces should be free of dirt, oil, grease, and other contaminants or coatings which might interfere with proper adhesion.
Concrete and Terrazzo
Remove oil and grease with a detergent followed by thorough rinsing and drying. WOOD: Remove coating and finishes by thoroughly sanding.
Steel
Remove grease and oil; then sandblast.
Application
Apply Polythane - 1001 by brush or roller. Change brush or roller as soon as material on them becomes tacky.
Do not leave containers open for long periods as Polythane - 1001 cures with moisture from the air. Provide adequate ventilation when Polythane - 1001 is used indoors.
Concrete 200-250 sq.ft./gal.
Wood 200-250 sq.ft./gal.
Steel 300-350 sq.ft./gal.
Coverage will depend on surface porosity and texture.
Shelf Life: 1 year
Coming soon - Call (800) 966-5142 for more info or email info@deltapolymers.com